Preparing to print
To print a single photo, use the
photo/envelope feeder
.
To print multiple photos, follow these steps:
1. Verify that the printer is turned on.
2. Remove the Out tray, and then remove all of the paper from the In tray.
3. Slide the paper-width guide all the way to the left, and then pull out the paper-
length guide.
HP Deskjet 6800 series printer
74
4. Verify that the photo paper is flat.
If the photo paper is not flat, see the
photo paper storage instructions
.
5. Place the photo paper in the In tray with the side to be printed on facing down.
If you are using a photo paper that has a tear-off tab, verify that the tab is
pointing away from the printer.
6. Slide the paper guides firmly against the paper.
7. Replace the Out tray.